E-WMS (Pick-IT) CAB - CSETTINGS.DAT explained
WMS documentation
Introduction
This document describes the settings available in CSETTINGS.DAT, when using
E-WMS CAB or Pick-IT 'CAB'.
Description
After installation of the
E-WMS or Pick-IT CAB version on a scanner, one of
the files installed on the scanner is CSETTINGS.DAT. This file offers 'custom
settings', in addition to settings configured in the Globe scanner settings. You
can find CSETTINGS.DAT in \Program Files\E-WMS or \Program Files\Pick-IT on the
device. If you change settings and want to restore these on a cold boot, also
copy this file to the device's cold boot folder after changing.
E-WMS CAB version
| Setting name |
Possible values |
Default value |
Explanation |
| |
|
|
|
| ORDOBLIGATORYADVICE |
Y,N |
N |
Determines if a picking advice for Sales Order
Fulfillment is mandatory (location and serial/batch number) |
| PRDOBLIGATORYADVICE |
Y,N |
N |
Determines if a picking advice for Production Issues is
mandatory (location and serial/batch number) |
| VPLONESCREENTRANSFER |
Y,N |
Y |
When using transfer menu 'Source to target', only
warehouse and location are scanned in the 'target' steps,
otherwise also quantity and serial/batch number have to be scanned in
the target steps. |
| ORMProdDate |
Y,N |
N |
Enable or disable input of serial/batch 'start date'
on Purchase Receipts |
| ORDSSCCNumberDef |
Y,N |
?,(any), |
Default value for a SSCC number, when using 'SSCC'
number in Sales Order Fulfillment. "?" pre-fills with previous used SSCC
number, otherwise this value is used to pre-fill (for example 'empty')
|
|
ORDORKRGSELECTONSALESORDERNUMBER |
Y,N |
N |
The list of sales orders in Sales Order
Fulfillment is ordered on sales order number instead of default 'syscreated'
(date and time created) |
| ALGItemOnlyScancode |
Y,N |
N |
Y=Accept only scan codes in all scan
processes N=accept both scan code and item code |
| VOANOSCANCODEQTY |
Y,N |
Y |
Sales Order Fulfillment: Y=ignore the
quantity 'factor' in WMS scan codes, N=use the scan code factor quantity |
| ORMNOSCANCODEQTY |
Y,N |
Y |
Purchase Receipts: Y=ignore the quantity
'factor' in WMS scan codes, N=use the scan code factor quantity |
| STTCode |
Y,N |
N |
Use the Stock Transactions Code in 'Stock
Transactions' |
| ALGSpecSerialItem |
Y,N |
N |
N/A, specific custom solution |
| ALGLANDSCAPEVIEW |
Y,N |
N |
Use landscape orientated screen (other
placement buttons) |
| ALGEANSKIPFIRSTITEMCHARACTER |
Y,N |
Y |
Truncate the first digit of a scanned
EAN128 bar code item identification (=EAN128 AI 01 & 02, in most case
'0' prefix) |
| ALGEANSaveFirstZeroCharacter |
Y,N |
N |
In addition to previous setting, do NOT
truncate first digit of a scanned EAN128 item code (AI 01 or 02) when it
is a zero ('0'), otherwise truncate |
| VOASSCCEAN128 |
Y,N |
Y |
Uses SSCC number scanning in Sales Order
Fulfillment and assume the SSCC number is an EAN128 bar code (AI "00").
|
| CSUSEHEFRAFIX |
Y,N |
N |
N/A, specific custom solution |
| ALGSMALLSCREENVIEW |
Y,N |
N |
Assumes the mobile device screen is smaller (225x200
instead of 320x200) |
| VOAMSGDBLSBNR |
Y,N |
Y |
Extra warning message when using previous picked batch
number (in same sales order) in Sales Order Fulfillment. |
| VOASBLTLQTYMSG |
Y,N |
Y |
Disable the message "picked less.." when scanning a
batch item in Sales Order Fulfillment (to allow picking several batches
for the same order line, without the 'picked less' warning message) |
| CSVOASHOWICLASS01 |
Y,N |
N |
N/A, specific custom solution |
| ORMMSGDBLSBNR |
Y,N |
Y |
Extra warning message when using previous received
batch number (in same receipt) in Purchase Receipts. |
| VOAStockBrowse |
Y,N |
N |
Show extra button for item stock information, in Sales
Order Fulfillment |
| VOAStockBrowseGetLoc |
Y,N |
N |
Allow to copy location code from the stock browser
(previous setting) to the location scan text box |
| CSSHORKRGDOCNRREFER |
Y,N |
N |
Shows order header information in Sales Order
Fulfillment: 'description' and 'your reference' (orkrg.refer and
orkrg.docnumber) |
| CSVPLSimpleEAN128FullScan |
Y,N |
N |
Y: When scanning an EAN128 barcode including S/B number
and quantity, input of SB and quantity is prefilled and skipped
N: When scanning an EAN128 barcode including S/B number and quantity,
these values are prefilled but SB
and quantity still have to be confirmed |
| CSVOASSCCBOXNR |
Y,N |
N |
N/A, specific custom solution |
| |
|
|
|
| |
|
|
|
Related documents
| Main Category: |
Support Product Know How |
Document Type: |
Support - On-line help |
| Category: |
On-line help files |
Security level: |
All - 0 |
| Sub category: |
Details |
Document ID: |
21.833.448 |
| Assortment: |
E-WMS
|
Date: |
25-03-2013 |
| Release: |
|
Attachment: |
|
| Disclaimer |
|
|